What details should we pay attention to when using the scrap metal shredder?

   As a mechanical equipment, the scrap iron shredder can crush various scraps and can be equipped with a magnetic roller to separate aluminum and iron mixed scraps. It has the advantage of small shredding granularity. In our daily use and operation of the scrap metal shredder, there are some details that require our special attention:

   Pay attention to the installation and fixation of the scrap iron shredder equipment. The shredder should be fixed on the cement foundation. If you need to frequently change the working site, the shredder and motor equipment should be made of angle iron on the machine base to prevent the shredder from being damaged due to movement.

   It is necessary to start up the scrap iron shredder equipment for inspection. If the scrap iron shredder uses a diesel engine as power, the power of the two should be matched, that is, the power of the diesel engine is slightly greater than the power of the shredder, and the pulley grooves of the two should be inconsistent. The outer end faces of the pulleys should be on the same plane. Before starting up, be sure to check whether the connecting bolts of each part of the unit are tight, whether the tightness of the transmission belt is appropriate, and whether the power cord is normal. Check whether the motor shaft and the shredder shaft are parallel, and check whether the blades and screens are normal.

   Production operation requirements during the working process of scrap iron shredder. During work, you should always pay attention to the working status of the shredder. The material should be fed evenly to prevent clogging and do not be overloaded for a long time. If any vibration, noise, high temperature of the bearing and body, or material spraying out are found, the machine should be stopped immediately for inspection. If there are no problems, continue working.